This patented hanger can either be threaded onto a rod (as shown above), or snapped into a strut (as shown below), without the use of extra hardware or tools! The pipe is simply snapped into the hanger and locked in place using the snug-fit size-adjusting lock arm. SnapNStrut U is a P hanger, without the threaded hole.
Used for supporting conduits on flat surfaces (as shown below), such as beams, walls, machinery or the flat side of a strut. Like the Strut-N-Rod Hanger, Handy-Snap hangers accept several different pipe sizes. Offset design allows space for fittings and couplings.
UV Resistant Pipe Hanger
The SnapNStrut line of pipe hangers is produced from a high-performance, UV stabilized 6/6 nylon resin possessing exceptional long term stress resistance and chemical stability over a wide range of temperatures. We offer polypropylene as a standard option.
Greater Loads & Extreme Temperatures
Produced from a specialty engineered, high strength, high temperature nylon resin, the SnapNStrut pipe hangers allow for larger factors of safety: at 250°F, working temperatures and for intermediate temperatures up to 480°F. For refrigeration, allowable working temperatures down to -70°F.
Adjustability & Fit
The hinged, snap-on lock arm adjusts for pipe O.D. variations, affording each hanger the ability to accommodate several different pipe sizes. The pipe is nestled in a snug fit without any crimping of its wall.
Corrosion-Proof & Chemical-Resistant
With a totally non-metallic design, there is no need to isolate copper tubing. Eliminate the concern for galvanic corrosion. The SnapNStrut hangers will withstand most commonly encountered chemicals and refrigerants, including Freon and Ammonia (chemical resistance charts available upon request).
Click here for complete list of chemicals.
The nature of the nylon material utilized, combined with the uniquely engineered design, absorbs vibration and acts as a cushion between the piping and its supporting structure. Click here for vibration reports.
When used in a strut, the upper and lower engagement plates are designed to grip the strut and restrain lateral movement along its length.
Versatility & Adaptability for Supports
Each SnapNStrut P hanger is threaded to receive a rod and each can be snapped into a strut. Handy-Snap hangers possess two receptacles for screw mounting to a flat surface (i.e., walls, beams, flat side of strut or machinery) while automatically positioning pipe centerline to allow space for fittings. Each hanger accommodates several different sizes and all types of pipe, conduit and tubing. Versatile hangers for many different jobs means less inventory required.
No Nuts Required for Supports
When used in a strut, SnapNStrut P pipe support hangers are self gripping. When used on a rod, the hanger itself is threaded onto the rod. when the pipe is inserted into the hanger, the hanger can no longer turn. Thus, even the need for a lock nut is eliminated.